MATERIAL DESCRIPTION
Mesh banner PVC is a rolled material with a series of holes to allow wind to pass through. This is the fundamental difference versus a standard solid banner material. You should consider using mesh when you are looking to display your banner in a high wind area or when attaching your graphic to a less stable surface such as a freestanding heras fence.
SHEET SIZE OPTIONS
Material thickness 340gsm
Roll width up to a massive 5000mm by any length!
MATERIAL DATA SHEET
Single Sided– Mesh Banner PVC can be digitally printed direct to the face of the material on our large format printers using UV cured inks which offer market leading print quality, robustness and longevity.
Double Sided – Mesh Banner PVC can be printed on both sides with the same or varying artwork images. Our large format printers allow for perfect registration given accurate double sided prints.
Not available
Square Cutting – Mesh banner PVC can be supplied cut to any required square or rectangular panel size within the maximum sheet size. For guaranteed accuracy all of our material is cut on a laser guided cutting table
Simple Shapes – including radius corners, circles, triangles and basic shapes are possible with a high level of accuracy and quality of finish when cut on our laser guided cutting tables.
Edges Hemmed – Edges of the Magnetic PVC are folded over and sealed giving the edge a hem for added strength and a clean looking finish
Eyelets – Brass or silver eyelets are punched through the material, perfect for hanging and often used with cable ties or bungees which we can supply.
Pole Pockets – The material can be folded over and stitched or welded to create a pocket, ideal for hanging or weighting. Pole pockets are always defined in our quotes as a flat dimension and are inclusive of the overall height of the banner not in addition.
Printed Mesh PVC, ideal for external high wind areas.
Mesh banner PVC has a series of holes to allow air / wind to pass through. A preferred alternative to standard banner PVC in more demanding external conditions.
We offer mesh banner when the display area is subject to high winds, for example mesh banner for scaffolds, mesh banner for herras fencing and mesh banners for using at height. With a solid banner PVC in high wind it will act like a sail and excessive wind load will either destroy the banner or the display it is attached to!
All our mesh banner PVC is printed on our roll fed UV digital presses. UV inks are robust for external use. Our mesh banner can be finished with hems and eyelets or alternatively pole pockets.
Mesh banner can be printed full colour photographic digital and has a maximum roll width of a whopping 5000mm!!
